Design Methodology and modeling of a drive mechanic


Authors

  • Hernán Darío Patiño Duque Universidad Tecnológica de Pereira
  • Luis Miguel Lopez Posada Universidad Tecnológica de Pereira
  • Eduardo Santos Mosquera Angulo Universidad Tecnológica de Pereira

DOI:

https://doi.org/10.22517/23447214.12801

Keywords:

Drive, belts (trapezoidal), step, transmission ratio.

Abstract

This work presents a methodology for the design and
modeling of a mechanical drive for a jackhammer and a belt
conveyor. Initially it is described the different systems of power
transmission of which this is composed, giving a perspective of the
transforming means movements. Subsequently the electric motor
selection is made and the equations are show for calculating for
different steps (belt transmissions, chain sprockets and wheels).
The results or parameters obtained must be standardized using
commercial catalogs to then reach a possible construction of the
drive. Finally the assembly drawings and the exploded views of the
elements that compose the system are made in a software of
modeling 3D.

Downloads

Download data is not yet available.

Author Biographies

Hernán Darío Patiño Duque, Universidad Tecnológica de Pereira

Estudiante de Ingenieria Mecánica semestre X

Luis Miguel Lopez Posada, Universidad Tecnológica de Pereira

Estudiante de Ingenieria Mecánica semestre IX

Eduardo Santos Mosquera Angulo, Universidad Tecnológica de Pereira

Profesor jubilado de la Universidad Tecnológica de Pereira

Facultad de Ingeniería Mecánica

Downloads

Published

2017-03-30

How to Cite

Patiño Duque, H. D., Lopez Posada, L. M., & Mosquera Angulo, E. S. (2017). Design Methodology and modeling of a drive mechanic. Scientia Et Technica, 22(1), 24–33. https://doi.org/10.22517/23447214.12801

Issue

Vol. 22 No. 1 (2017)

Section

Mecánica

License

Copyrights

The journal is free open access. The papers are published under the Creative Commons Attribution / Attribution-NonCommercial-NoDerivatives 4.0 International - CC BY-NC-ND 4.0 license. For this reason, the author or authors of a manuscript accepted for publication will yield all the economic rights to the Universidad Tecnológica of Pereira free of charge, taking into account the following:

In the event that the submitted manuscript is accepted for publication, the authors must grant permission to the journal, in unlimited time, to reproduce, to edit, distribute, exhibit and publish anywhere, either by means printed, electronic, databases, repositories, optical discs, Internet or any other required medium. In all cases, the journal preserves the obligation to respect, the moral rights of the authors, contained in article 30 of Law 23 of 1982 of the Government Colombian.

The transferors using ASSIGNMENT OF PATRIMONIAL RIGHTS letter declare that all the material that is part of the article is entirely free of copyright.  Therefore, the authors are responsible for any litigation or related claim to intellectual property rights. They exonerate of all responsibility to the Universidad Tecnológica of Pereira (publishing entity) and the Scientia et Technica journal. Likewise, the authors accept that the work presented will be distributed in free open access, safeguarding copyright under the Creative Commons Attribution / Recognition-NonCommercial-NoDerivatives 4.0 International - https://creativecommons.org/licenses/by-nc-nd/4.0/deed.es license.