Simulation of a flat solar collector with thermal storage for drying food


Authors

DOI:

https://doi.org/10.22517/23447214.24835

Keywords:

drying, numerical fluid simulation, solar collector, solar energy, thermal energy storage

Abstract

This research addresses the numerical simulation of a working fluid, using specialized SolidWorks Flow Simulation Software, analyzing the behavior of a drying air in a flat solar collector with thermal energy storage. In addition, one of the main centers of computational study is the relationship between flow, air temperature at the outlet of the collector and efficiency; This study allows researchers a vision of the principles of the design of these technologies, especially if it focuses on the drying of food. Then, a proposal is made on the requirements to be taken into account for the sizing of collectors based on the requirements of the product to be dried. Among the results obtained, it is established that a correctly designed collector and under a variable air flow, based on the intensity of the irradiation in specific coordinates and location, can reach efficiencies close to 30% with temperatures close to 60 ° C, being ideal for injecting this fluid into a drying chamber, where the food to be dehydrated is available. For the selection of the volume of the material for energy storage, it is recommended to take the melting temperatures as a base, with a constant flow of air, it is normal that within the system, the temperature varies depending on the position, therefore it is recommending the application of materials with different melting temperatures, which are strategically located within the storage tank.

Downloads

Download data is not yet available.

Author Biographies

Arly Darío Rincón Quintero, Unidades Tecnológicas de Santander

was born in Aguachica, Cesar, Colombia in 1982. He received the degree in mechanical engineering from Francisco de Paula Santander University, Colombia, in 2005 and the degree Master in Energy Efficiency and Sustainability from the University of the Basque Country UPV/EHU, Bilbao, España, in 2013. He is currently pursuing the Ph.D. degree in Energy efficiency and sustainability in engineering and architecture with Basque Country UPV/EHU,Bilbao, España. He is a senior researcher before MinCiencias, Colombia associate professor at the Unidades Tecnologicas de Santander, in the Faculty of Natural Sciences and Engineering.

Luis Alfonso del Portillo Valdés, Universidad del País Vasco UPV/EHU

PhD in Energy and Fluidomechanical Engineering from the University of Valladolid, Industrial Engineer from the Higher Technical School of Engineering of the UNED (National University of Distance Education: Madrid ES), and Industrial Technical Engineer from the University School of Industrial Technical Engineering of Bilbao, UPV/EHU and the Research Group ENEDI (Energy in Building).

Camilo Leonardo Sandoval Rodriguez, Unidades Tecnológicas de Santander

Was born in Bucaramanga, Santander, on July 24, 1977. Electronic Engineer from the Industrial University of Santander, Master in Electronic Engineering from the Industrial University of Santander and PhD in electronics and communications from the University of the Basque Country EHU-UPV, Spain. Professor of the Technological Units of Santander, attached to the Coordination of Electromechanics and director of the Research Group on Energy Systems, Automation and Control GISEAC.

Brayan Eduardo Tarazona Romero, Unidades Tecnológicas de Santander

Was born in Floridablanca, Santander, on August 21, 1992. Electromechanical technologist of the Unidades Tecnológicas de Santander, Colombia in 2013. Ingeniero Electromecánico de las Unidades Tecnológicas de Santander, Colombia en el año 2015. Master in Renewable Energies and Energy Efficiency from the Open University of Madrid, Spain in 2018 and PhD in Energy Efficiency and Sustainability in Engineering and Architecture from the University of the Basque Country EHU-UPV, Spain. Professor of the Technological Units of Santander, attached to the Coordination of Electromechanics, the seedbed Technological Evolution EVOTEC and the Research Group in Energy Systems, Automation and Control GISEAC.

Wilmar Leonardo Rondón Romero, Unidades Tecnológicas de Santander

was born in Bucaramanga, Santander, Colombia in 1993. He received the degree in Electromechanical engineering from Unidades Tecnológicas de Santander, in 2017. He is a junior researcher before MinCiencias, Colombia.

References

[1] D. Kizildag, J. Castro, H. Kessentini, E. Schillaci, and J. Rigola, "First test field performance of highly efficient flat plate solar collectors with transparent insulation and low-cost overheating protection," Sol. Energy, vol. 236, no. February, pp. 239-248, 2022. DOI: https://doi.org/10.1016/j.solener.2022.02.007

[2] B. V. Balakin, M. Stava, and A. Kosinska, "Photothermal convection of a magnetic nanofluid in a direct absorption solar collector," Sol. Energy, vol. 239, no. April, pp. 33-39, 2022. DOI: https://doi.org/10.1016/j.solener.2022.04.027

[3] W. Ajbar, J. A. Hernández, A. Parrales, and L. Torres, "Thermal efficiency improvement of parabolic trough solar collector using different kinds of hybrid nanofluids," Case Stud. Therm. Eng., vol. 42, no. November 2022, p. 102759, 2023. DOI: https://doi.org/10.1016/j.csite.2023.102759

[4] D. García-Menéndez, J. C. Ríos-Fernández, A. M. Blanco-Marigorta, and M. J. Suárez-López, "Dynamic simulation and exergetic analysis of a solar thermal collector installation," Alexandria Eng. J., vol. 61, no. 2, pp. 1665-1677, 2022. DOI: https://doi.org/10.1016/j.aej.2021.06.075

[5] A. A. Al-Tabbakh, "Numerical transient modeling of a flat plate solar collector," Results Eng., vol. 15, no. August, p. 100580, 2022, DOI: https://doi.org/10.1016/j.rineng.2022.100580

[6] D. De Maio, C. D'Alessandro, A. Caldarelli, M. Musto, and R. Russo, "Solar selective coatings for evacuated flat plate collectors: Optimisation and efficiency robustness analysis," Sol. Energy Mater. Sol. Cells, vol. 242, no. February, p. 111749, 2022. DOI: https://doi.org/10.1016/j.solmat.2022.111749

[7] A. Dhaundiyal and D. Atsu, "The effect of thermo-fluid properties of air on the solar collector system," Alexandria Eng. J., vol. 61, no. 4, pp. 2825-2839, 2022. DOI: https://doi.org/10.1016/j.aej.2021.08.015

[8] K. N. Yehualashet, O. Fatoba, and S. M. Asfaw, "Experimental study and numerical analysis of thermal performance of corrugated plate solar collector," Mater. Today Proc., vol. 62, pp. 2849-2856. 2022, DOI: https://doi.org/10.1016/j.matpr.2022.02.414

[9] A. O. Al-Sulttani et al., "Thermal effectiveness of solar collector using Graphene nanostructures suspended in ethylene glycol-water mixtures," Energy Reports, vol. 8, pp. 1867-1882, 2022. DOI: https://doi.org/10.1016/j.egyr.2022.01.007

[10] A. M. Ajeena, P. Víg, and I. Farkas, "A comprehensive analysis of nanofluids and their practical applications for flat plate solar collectors: Fundamentals, thermophysical properties, stability, and difficulties," Energy Reports, vol. 8, pp. 4461-4490, 2022. DOI: https://doi.org/10.1016/j.egyr.2022.03.088

[11] O. Panagopoulos, A. A. Argiriou, A. Dokouzis, S. O. Alexopoulos, and J. Göttsche, "Optical and thermal performance simulation of a micro-mirror solar collector," Energy Reports, vol. 8, pp. 6624-6632, 2022. DOI: https://doi.org/10.1016/j.egyr.2022.05.007

[12] L. Xu, A. Khalifeh, A. Khandakar, and B. Vaferi, "Numerical investigating the effect of Al2O3-water nanofluids on the thermal efficiency of flat plate solar collectors," Energy Reports, vol. 8, pp. 6530-6542, 2022. DOI: https://doi.org/10.1016/j.egyr.2022.05.012

[13] E. Gaudino, M. Musto, A. Caldarelli, D. De Luca, E. Di Gennaro, and R. Russo, "Evaluation of the absorber temperature frequency function valid for evacuated flat plate collectors," Energy Reports, vol. 8, pp. 1071-1080, 2022. DOI: https://doi.org/10.1016/j.egyr.2022.05.275

[14] Y. Wenceslas Koholé, F. Cyrille Vincelas Fohagui, and G. Tchuen, "Flat-plate solar collector thermal performance assessment via energy, exergy and irreversibility analysis," Energy Convers. Manag. X, vol. 15, no. June, 2022. DOI: https://doi.org/10.1016/j.ecmx.2022.100247

[15] A. Al-Manea, R. Al-Rbaihat, H. T. Kadhim, A. Alahmer, T. Yusaf, and K. Egab, "Experimental and numerical study to develop TRANSYS model for an active flat plate solar collector with an internally serpentine tube receiver," Int. J. Thermofluids, vol. 15, no. August, p. 100189, 2022. DOI: https://doi.org/10.1016/j.ijft.2022.100189

[16] T. desisa Rago, "Experimental and Numerical Investigation of Heat Transfer Characteristics in Solar Flat Plate Collector Using Nanofluids," SSRN Electron. J., vol. 18, no. March, p. 100325, 2022. DOI: https://doi.org/10.2139/ssrn.4282071

[17] P. Pourmoghadam, M. Farighi, F. Pourfayaz, and A. Kasaeian, "Annual transient analysis of energetic, exergetic, and economic performances of solar cascade organic Rankine cycles integrated with PCM-based thermal energy storage systems," Case Stud. Therm. Eng., vol. 28, p. 101388, 2021. DOI: https://doi.org/10.1016/j.csite.2021.101388

[18] K. Lentswe, A. Mawire, P. Owusu, and A. Shobo, "A review of parabolic solar cookers with thermal energy storage," Heliyon, vol. 7, no. 10, p. e08226, 2021. DOI: https://doi.org/10.1016/j.heliyon.2021.e08226

[19] G. Sadeghi, M. Najafzadeh, and H. Safarzadeh, "Utilizing Gene-Expression Programming in Modelling the Thermal Performance of Evacuated Tube Solar Collectors," J. Energy Storage, vol. 30, no. March 2020, p. 101546, 2020, DOI: https://doi.org/10.1016/j.est.2020.101546

[20] J. Deng, T. S. O'Donovan, Z. Tian, J. King, and S. Speake, "Thermal performance predictions and tests of a novel type of flat plate solar thermal collectors by integrating with a freeze tolerance solution," Energy Convers. Manag., vol. 198, no. April, p. 111784, 2019, DOI: https://doi.org/10.1016/j.enconman.2019.111784

[21] V. Unterberger, K. Lichtenegger, V. Kaisermayer, M. Gölles, and M. Horn, "An adaptive short-term forecasting method for the energy yield of flat-plate solar collector systems," Appl. Energy, vol. 293, p. 116891, 2021. DOI: https://doi.org/10.1016/j.apenergy.2021.116891

[22] W. Villasmil, M. Troxler, R. Hendry, P. Schuetz, and J. Worlitschek, "Control strategies of solar heating systems coupled with seasonal thermal energy storage in self-sufficient buildings," J. Energy Storage, vol. 42, 2021. DOI: https://doi.org/10.1016/j.est.2021.103069

[23] M. M. Ali, O. K. Ahmed, and E. F. Abbas, "Performance of solar pond integrated with photovoltaic/thermal collectors," Energy Reports, vol. 6, pp. 3200-3211, 2020. DOI: https://doi.org/10.1016/j.egyr.2020.11.037

[24] T. Zhang, G. Lu, X. Zhai, and B. Li, "Structure optimization of a phase change material integrated solar air collector/storage unit based upon phase change analysis," Energy Reports, vol. 7, pp. 1828-1836, 2021, DOI: https://doi.org/10.1016/j.egyr.2021.03.040

Downloads

Published

2023-03-31

How to Cite

Rincón Quintero, A. D., del Portillo Valdés, L. A., Sandoval Rodriguez, C. L., Tarazona Romero, B. E., & Rondón Romero, W. L. (2023). Simulation of a flat solar collector with thermal storage for drying food . Scientia Et Technica, 28(01), 15–22. https://doi.org/10.22517/23447214.24835

Issue

Vol. 28 No. 01 (2023): Enero-Marzo

Section

Mecánica

License

Copyright (c) 2023 Scientia et Technica

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The undersigned authors declare that the article submitted to the journal Scientia et Technica is an original work and that all its content is free of third-party copyright restrictions or has the corresponding authorizations. Consequently, the authors assume responsibility for any litigation or claim related to intellectual property rights, releasing the Technological University of Pereira and the journal Scientia et Technica from any liability.

If the submitted work is accepted for publication, the authors retain copyright to the article and grant the journal Scientia et Technica the right of first publication, as well as a non-exclusive, perpetual license to reproduce, edit, distribute, display, and publicly communicate the article in any medium or format, including print, electronic, databases, repositories, the Internet, or other scientific dissemination systems. The authors agree that the article will be published in open access and distributed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0).

The journal Scientia will respect in all cases the moral rights of the authors, in accordance with the provisions of article 30 of Law 23 of 1982 of the Republic of Colombia, recognizing the authorship of the work, the right to integrity and the right of disclosure, which are inalienable and non-waivable.