Evaluación de los parámetros de temple y revenido para el acero AISI/SAE1045 a escala industrial


Authors

  • David Mazuera Robledo
  • Andrés Ortiz Cárdenas

DOI:

https://doi.org/10.22517/23447214.1461

Abstract

Se realizó un experimento del tipo “mover un factor a la vez” (OFAT) para evaluar diferentes combinaciones de temperatura y tiempo en los tratamientos térmicos de temple y revenido del acero AISI-SAE 1045 a escala industrial. La evaluación se realizó con base en el análisis de la microestructura y dureza obtenidas en cada tratamiento térmico. Los resultados obtenidos sugieren que en condiciones industriales la temperatura recomendada para austenización del acero AISI/SAE1045 es 870ºC y que puede existir una relación entre la temperatura de austenización y la tetragonalidad de la mertensita obtenida al templar aceros simples al carbono.

Downloads

Download data is not yet available.

Downloads

Published

2011-12-30

How to Cite

Mazuera Robledo, D., & Ortiz Cárdenas, A. (2011). Evaluación de los parámetros de temple y revenido para el acero AISI/SAE1045 a escala industrial. Scientia Et Technica, 3(49), 25–29. https://doi.org/10.22517/23447214.1461

Issue

Vol. 3 No. 49 (2011)

Section

Mecánica

License

Copyrights

The journal is free open access. The papers are published under the Creative Commons Attribution / Attribution-NonCommercial-NoDerivatives 4.0 International - CC BY-NC-ND 4.0 license. For this reason, the author or authors of a manuscript accepted for publication will yield all the economic rights to the Universidad Tecnológica of Pereira free of charge, taking into account the following:

In the event that the submitted manuscript is accepted for publication, the authors must grant permission to the journal, in unlimited time, to reproduce, to edit, distribute, exhibit and publish anywhere, either by means printed, electronic, databases, repositories, optical discs, Internet or any other required medium. In all cases, the journal preserves the obligation to respect, the moral rights of the authors, contained in article 30 of Law 23 of 1982 of the Government Colombian.

The transferors using ASSIGNMENT OF PATRIMONIAL RIGHTS letter declare that all the material that is part of the article is entirely free of copyright.  Therefore, the authors are responsible for any litigation or related claim to intellectual property rights. They exonerate of all responsibility to the Universidad Tecnológica of Pereira (publishing entity) and the Scientia et Technica journal. Likewise, the authors accept that the work presented will be distributed in free open access, safeguarding copyright under the Creative Commons Attribution / Recognition-NonCommercial-NoDerivatives 4.0 International - https://creativecommons.org/licenses/by-nc-nd/4.0/deed.es license.