Construction of a bench for electro-pneumatic practices


Authors

  • Paolo Amato Hernández
  • Mario Camargo Ardila
  • Jhonatan Durán Bastidas
  • Carlos Pacheco Amell
  • Javier Roldán Mckinley Programa de Ingeniería Mecánica Universidad del Atlántico
  • Jovanny Duque

DOI:

https://doi.org/10.22517/23447214.9314

Keywords:

electroneumática, banco de pruebas, diseño, práctica de laboratorio

Abstract

—Construction criteria for an electro-pneumatic teaching bench are presented. A suitable work bench was obtained based on Ergonomics, load analysis and structural elements selection. Pneumatic circuit elements were modified to fit into the bench work area. The usefulness in the assembly for the created lab practices was highlighted, and complemented with audiovisual aids for both instructors and students.

Downloads

Download data is not yet available.

Author Biographies

Paolo Amato Hernández

Ingeniero Mecánico

Egresado de la Universidad del Atlántico

Mario Camargo Ardila

Ingeniero Mecánico

Egresado de la Universidad del Atlántico

Jhonatan Durán Bastidas

Ingeniero Mecánico

Egresado de la Universidad del Atlántico

Carlos Pacheco Amell

Ingeniero Mecánico

Egresado de la Universidad del Atlántico

Javier Roldán Mckinley, Programa de Ingeniería Mecánica Universidad del Atlántico

Profesor Asociado

Programa de Ingeniería Mecánica

Universidad del Atlántico

Jovanny Duque

Profesor Programa de Ingeniería Mecatrónica

Instituto Tecnológico de Soledad, Atlántico

Downloads

Published

2015-06-30

How to Cite

Amato Hernández, P., Camargo Ardila, M., Durán Bastidas, J., Pacheco Amell, C., Roldán Mckinley, J., & Duque, J. (2015). Construction of a bench for electro-pneumatic practices. Scientia Et Technica, 20(2), 119–128. https://doi.org/10.22517/23447214.9314

Issue

Vol. 20 No. 2 (2015)

Section

Mecánica

License

The undersigned authors declare that the article submitted to the journal Scientia et Technica is an original work and that all its content is free of third-party copyright restrictions or has the corresponding authorizations. Consequently, the authors assume responsibility for any litigation or claim related to intellectual property rights, releasing the Technological University of Pereira and the journal Scientia et Technica from any liability.

If the submitted work is accepted for publication, the authors retain copyright to the article and grant the journal Scientia et Technica the right of first publication, as well as a non-exclusive, perpetual license to reproduce, edit, distribute, display, and publicly communicate the article in any medium or format, including print, electronic, databases, repositories, the Internet, or other scientific dissemination systems. The authors agree that the article will be published in open access and distributed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0).

The journal Scientia will respect in all cases the moral rights of the authors, in accordance with the provisions of article 30 of Law 23 of 1982 of the Republic of Colombia, recognizing the authorship of the work, the right to integrity and the right of disclosure, which are inalienable and non-waivable.