Micromodeling of a dual-phase steel using an idealized micrograph generated by Voronoi diagrams


Authors

DOI:

https://doi.org/10.22517/23447214.24822

Keywords:

Microstructure, tessellations, modeling, idealized micrographs, heat treatments, intercritical temperatures.

Abstract

Dual phase (DP) steels are high strength steels used mainly in the production of vehicle bodies, currently about 74% of the structural components are made of this type of material. These DP steels are composed of a soft ferrite matrix with a hard, martensite phase. In this research, mechanical properties characteristic of these materials is linked, establishing dependence between volume fractions of each phase and simulations of the mechanical behavior in different situations are developed. Implementing a 2D bilinear plasticity model from the synergy of three design programs, regions of the martensitic phase of the material were generated in a 3D space. In the same way, these inclusions were parameterized and modeled together with a ferritic matrix. Then, using FEM to simulate 3D micromodeling (RVE), stress-strain diagrams are obtained.  Finally, the results show deviations of 10% on average from the experimental values.

Downloads

Download data is not yet available.

Downloads

Published

2022-12-18

How to Cite

Ruiz Cuero, Y., & Bohórquez Ávila, C. A. (2022). Micromodeling of a dual-phase steel using an idealized micrograph generated by Voronoi diagrams. Scientia Et Technica, 27(4), 267–274. https://doi.org/10.22517/23447214.24822

Issue

Vol. 27 No. 4 (2022): Octubre - Diciembre

Section

Sistemas y Computación

License

Copyright (c) 2023 Scientia et Technica

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Copyrights

The journal is free open access. The papers are published under the Creative Commons Attribution / Attribution-NonCommercial-NoDerivatives 4.0 International - CC BY-NC-ND 4.0 license. For this reason, the author or authors of a manuscript accepted for publication will yield all the economic rights to the Universidad Tecnológica of Pereira free of charge, taking into account the following:

In the event that the submitted manuscript is accepted for publication, the authors must grant permission to the journal, in unlimited time, to reproduce, to edit, distribute, exhibit and publish anywhere, either by means printed, electronic, databases, repositories, optical discs, Internet or any other required medium. In all cases, the journal preserves the obligation to respect, the moral rights of the authors, contained in article 30 of Law 23 of 1982 of the Government Colombian.

The transferors using ASSIGNMENT OF PATRIMONIAL RIGHTS letter declare that all the material that is part of the article is entirely free of copyright.  Therefore, the authors are responsible for any litigation or related claim to intellectual property rights. They exonerate of all responsibility to the Universidad Tecnológica of Pereira (publishing entity) and the Scientia et Technica journal. Likewise, the authors accept that the work presented will be distributed in free open access, safeguarding copyright under the Creative Commons Attribution / Recognition-NonCommercial-NoDerivatives 4.0 International - https://creativecommons.org/licenses/by-nc-nd/4.0/deed.es license.