Reforzamiento de la aleacion de aluminio 6061 con carburos dobles de fe-cr obtenidos por aleacion mecanica


Authors

  • Julio C. Cuevas
  • William Barona M.
  • Hector Sanchez
  • Irvin Castro

Abstract

En este trabajo, se obtienen materiales compuestos vía pulvimetalurgia, de polvos de AA6061 reforzado con partículas de carburos dobles de Fe-Cr, obtenidos por Aleación Mecánica en un molino planetario. Los polvos, tanto de la matriz como del refuerzo son caracterizados y mezclados, para luego ser compactados, extruídos y finalmente envejecidos artificialmente, con el fin de evaluar sus propiedades mecánicas y tribológicas. La metodología experimental involucra el estudio de tres factores: factor composición (5 y 10% en volumen de refuerzo); factor tratamiento (T1 = material extruído, y T6 = envejecimiento artificial); y el factor refuerzo (tamizado por malla 400 y sin tamizar).

Downloads

Download data is not yet available.

Downloads

Published

2007-07-30

How to Cite

Cuevas, J. C., Barona M., W., Sanchez, H., & Castro, I. (2007). Reforzamiento de la aleacion de aluminio 6061 con carburos dobles de fe-cr obtenidos por aleacion mecanica. Scientia Et Technica, 1(36). Retrieved from https://revistas.utp.edu.co/index.php/revistaciencia/article/view/4959

Issue

Vol. 1 No. 36 (2007)

Section

Mecánica

License

Copyright (c) 2017 Scientia et technica

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The undersigned authors declare that the article submitted to the journal Scientia et Technica is an original work and that all its content is free of third-party copyright restrictions or has the corresponding authorizations. Consequently, the authors assume responsibility for any litigation or claim related to intellectual property rights, releasing the Technological University of Pereira and the journal Scientia et Technica from any liability.

If the submitted work is accepted for publication, the authors retain copyright to the article and grant the journal Scientia et Technica the right of first publication, as well as a non-exclusive, perpetual license to reproduce, edit, distribute, display, and publicly communicate the article in any medium or format, including print, electronic, databases, repositories, the Internet, or other scientific dissemination systems. The authors agree that the article will be published in open access and distributed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0).

The journal Scientia will respect in all cases the moral rights of the authors, in accordance with the provisions of article 30 of Law 23 of 1982 of the Republic of Colombia, recognizing the authorship of the work, the right to integrity and the right of disclosure, which are inalienable and non-waivable.