Desarrollo de un metodo de manufactura de injertos de polvo de hueso por moldeo


Authors

  • Danny Y. Reina C.
  • Fabio A. Rojas M.
  • Miguel A. Hidalgo
  • Fabian E. Ospina G.

Abstract

Se presentan los resultados de las pruebas de flexión, dureza (Shore A), impacto y absorción de agua realizadas a un primer modelo de mezcla biocompatible que cumpla con las cuatro propiedades mínimas que debe tener un biomaterial para ser usado como injerto óseo: osteoconducción, osteoinducción, osteogénesis y soporte estructural. Tal mezcla consiste de una matriz polimérica y un refuerzo de polvos de hueso liofilizado. Con base en los resultados obtenidos de cada prueba, se logró la inyección de piezas normalizadas útiles en implantología ósea, que muestran la viabilidad de fabricar objetos de relleno óseo a partir de mezclas de este tipo.

Downloads

Download data is not yet available.

Downloads

Published

2007-07-30

How to Cite

Reina C., D. Y., Rojas M., F. A., Hidalgo, M. A., & Ospina G., F. E. (2007). Desarrollo de un metodo de manufactura de injertos de polvo de hueso por moldeo. Scientia Et Technica, 1(36). Retrieved from https://revistas.utp.edu.co/index.php/revistaciencia/article/view/5121

Issue

Vol. 1 No. 36 (2007)

Section

Mecánica

License

Copyright (c) 2017 Scientia et technica

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The undersigned authors declare that the article submitted to the journal Scientia et Technica is an original work and that all its content is free of third-party copyright restrictions or has the corresponding authorizations. Consequently, the authors assume responsibility for any litigation or claim related to intellectual property rights, releasing the Technological University of Pereira and the journal Scientia et Technica from any liability.

If the submitted work is accepted for publication, the authors retain copyright to the article and grant the journal Scientia et Technica the right of first publication, as well as a non-exclusive, perpetual license to reproduce, edit, distribute, display, and publicly communicate the article in any medium or format, including print, electronic, databases, repositories, the Internet, or other scientific dissemination systems. The authors agree that the article will be published in open access and distributed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0).

The journal Scientia will respect in all cases the moral rights of the authors, in accordance with the provisions of article 30 of Law 23 of 1982 of the Republic of Colombia, recognizing the authorship of the work, the right to integrity and the right of disclosure, which are inalienable and non-waivable.